EMCO ISA 1932 Nozzle with Carrier Rings Series in all Welded Construction DES

Principle:

• EMCO ISA 1932 nozzles are used as primary elements in flow measurement of steam, liquid, and gas according to the differential pressure principle.

Design and calculation standards :

• ISO 5167-3
• Sizes : DN 50 - 500
• Pressure rating : PN 10 - 400, 150 - 2500 lbs
• β (d/D) : 0.3 < β < 0.8
• Material : Carbon steel P250GH, AISI 316, 16Mo3, 13CrMo4-5, 10CrMo9-10, WB 36, X20CrMoV121, P91, P92, other materials on request
• Mounting style : Weld ends according to DIN 2559 or ANSI B16.25
• Pressure taps : Ø 21.3 mm, 24 mm, 26.9mm, 3/8", 1/2" BSP, 1/2" NPT
• Tap lengths : 150 mm, others on request.
• Tap location : At least 45° apart. For steam flow in a horizontal pipe : 180° To be stated with order.
• Tappings : Single pressure tappings
• Tap lengths : 150 mm, others on request
• Tap location : At least 45 degrees apart, for sizes below DN 150. To be stated with order.

Technical Data

• Accuracy : 0,8 % for β < 0,6, (2β - 0,4) % for β > 0,6 (according to ISO 5167-3)
• Pressure loss : Depending on β, for β equal to 0,6 : ca. 60 % of the differential pressure measured
• Limits for Re. No. : 2 x 10 4 < ReD < 1 x 10 7 according to ISO 5167-3
• Accessories
• Shut-off valves and condensing chambers for steam flow measurement

Overall Dimensions

All Dims in mm

Horizontal Installation Requirements

Vertical Installation Requirements

• Marking:Main tube marked with flow direction. Taps with "+" and "-".
• Other data on attached nameplate.
• EMCO ISA 1932 nozzle with condensing chambers for steam flow measurement in a horizontal or vertical pipe line.

Works with:-

Differential pressure transmitters:-IDP10; IDP15; IDP25; IDP31; IDP50
And all our Absolute Pressure and Gauge Pressure transmitters, Temperature sensors and mass flow computers.
MultiVariable Transmitters :- IMV25, IMV30

Supplied by DP-Flow