Manufactured by 
The SITRANS FM MAG 5100 W is a Electromagnetic flow meter with its patented liners of hard rubber NBR or Ebonite and EPDM is a sensor for all water applications such as ground water, drinking water, cooling water, waste water, sewage or sludge applications. This electromagnetic flow meter is widely used in almost all general purpose water applications. The MAG5100 has MCERT approval for abstraction and discharge. The MAG meter can measure from very low velocities up to 10 m/s, giving it a very wide measurement range.
In order to have a complete flowmeter, please combine it with one of the following MAG transmitters:
SITRANS F M MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate
SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate
SITRANS F M MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate
The sensor can be combined with the energy calculator SITRANS FUE950
Application examples: Water abstraction, Water distribution network, Waste water and as custody transfer water meter or cooling meter.
Technical Details
| Meassuring range | 0 to 10 m/s |
| Nominal Sizes | From DN 15 to DN 2000 (1" to 78") |
| Accuracy | 0.2 % ±2.5 mm/s |
| Operating Pressure | Max. 16 bar (Max. 150 psi) |
| Ambient temperature | From -40 to 70 °C (-40 to 158 °F) |
| Medium Tempreature | From -10 to 70 °C (14 to 158 °F) |
| Liners | EPDM NBR hard rubber Ebonite hard rubber |
| Electrodes | Hastelloy C-276 Built-in grounding electrodes |
| Material | Carbon steel, with corrosion resistant two-component epoxy coating |
| Drinking Water Approvals | EPDM: WRAS, NSF/ANSI Standard 61, DVGW 270,ACS and BelgAqua NBR: NSF/ANSI Standard 61, WRAS Ebonite: WRAS |
| Custody Transfer Approvals | OILM R 49 MI-001 PTB K7.2 Germany) BEV OE12/C040 (Austria) |
| General approval | MCERTS Sira Certificate No. MC080136/00 |
Benefits
- Short lead time
- Rugged NBR hard rubber liner for all water and wastewater applications
- EPDM liner specifically for drinking water applications requiring special approvals
- Ebonite liner for drinking water, water and wastewater applications
- Increased low flow accuracy for water leakage detection (NBR or EPDM liner)
- Suitable for direct burial and constant flooding (IP68)
- Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprint
If you require further information on this product or would like a quotation, please contact dp-flow on:
email: sales@dp-flow.co.uk
sales +44(0)1608 544222
Supplied by DP-Flow