MODBUS WirelessHART Gateway WHA-GW-F2D2-0-A*-Z2-ETH

Used for data aquisition of new and historic HART instruments, enabling stranded smart instruments to provide greater monitoring capability.

The gateway is a low cost option to replacing and rewiring existing instrumentation and plant. When used with wireless HART adapters the network will create a self healing HART wireless mesh.

High cost savings compared with instrument replacements, and provides the HART 1-4 variables for plant condition alarms, maintanence alarms and forward planning.

Model

MODBUS WirelessHART Gateway WHA-GW-F2D2-0-A*-Z2-ETH>

• Graphical network analysis
• Simple and automatic configuration options
• Ethernet and RS 485 interface
• HART and MODBUS protocol via both interfaces
• Input WirelessHART wireless interface
• 24 V DC supply
• Redundant power supply connections

Technical data of WHA-GW-F2D2-0-A*-Z2-ETH

Supply

• Rated voltage 20 ... 30 V DC SELV/PELV
• Power consumption < 5 W

External bus

• Connection screw terminals for :- 0.2 ... 4 mm2 (rigid wire), - 0.2 ... 2.5 mm2 (flexible wire)
• Interface 1 Ethernet 10 BASE-T/100 BASE-TX , full galvanic isolation
• Protocol HART UDP, MODBUS TCP
• Interface 2 RS-485
• Protocol HART, MODBUS RTU
• Transfer rate max. 115 kBit/s

Electrical isolation

• Interface/interface basic insulation according to IEC 61140, rated insulation voltage 50 Veff

Directive conformity

• Electromagnetic compatibility
• Directive 2004/108/EC EN 61326-1:2006
• Radio and telecommunication terminal equipment The usage of 2.4 GHz equipment is bound to local  restrictions. Ensure that restrictions allow usage of this product before commisioning.
• Directive 99/5/EC EN 300328: V1.7.1, EN 301489-17: V1.3.2
• FCC CFR47 Part 15 B and C ANSI C63.4-2003

Conformity

• Degree of protection IEC 60529

Ambient conditions

• Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
• Storage temperature -40 ... 85 °C (-40 ... 185 °F)
• Corrosion resistance acc. to ISA-S71.04-1985, severity level G3, test setup and execution acc. to EN 60068-2-60

Mechanical specifications

• Degree of protection IP66/IP67
• Mass approx. 1 kg
• Dimensions 258 mm x 114 mm x 84 mm, without antenna and cable glands
• Mounting panel mounting

Data for application in connection with Ex-areas

• EC-Type Examination Certificate FM 12 ATEX 0061 , for additional certificates see www.pepperl-fuchs.com
• Group, category, type of protection, temperature class Ex-Hexagon II 3 G Ex nA nC IIC T4 Gc
• Directive conformity
• Directive 94/9/EC EN 60079-0:2012
• EN 60079-15:2010

Supplied by DP-Flow